Mining machine manufacturers Cinder Cinder crawler machine prices to find a professional machine manufacturer Cinder Cinder Jiangxi Xin Tong machine tire replacement method is as follows: (1) tire was stabbed slender foreign body such as a nail, if no obvious wound surface or smaller wounds, the tires can also continue to use (because the loader tire is low pressure tires, and run more slowly); If the wound is large, it must be repaired (because the machine is running, tire friction by squeezing the time a long tube will be damaged, and even wound growing, inner tubes protruding, causing tire scrap). (2) If the new tubeless valve at the bottom of the bolts must be tightened to prevent leakage; then the tire cavity foreign body removal, and thrown into the appropriate talcum powder, spread evenly. In order to make the inner liner, tire snapping, after loading tube to tube should be properly inflated, and then stuffed cushions. (3) the tire fitted to the rim, loaded locking ring, ring; installation process to protect the valve. (4) use air compressors to car tires inflated. (5) pressed boom lift rod, remove the bracket; thus tire change is completed, the entire process takes about 50 minutes. (6) to start the machine, find the nearest piece of relatively flat open space, depressed boom lift lever arm supporting the use of the front wheels off the ground, and then the side of the front axle support bracket near the flat tire and wheel Wedge good (must be closely coordinated with the driver, to avoid injury). (2) the use of a crowbar, etc. tools, removing the retainer ring and lock ring and then check the tire and rim outer surface of the liner are adhesions (tires use a longer time, the outer surface of the liner rim adhesions can occur). Support can be removed, if occurs, the machine is running slow reciprocating within a short distance, until the outer surface of the liner from the wheel rim; steering and non-high speed, to avoid damaging the tube. Then, to prop up the front again. (3) the relative position of the inner casing of the well marked, in order to find, remove foreign bodies and tire repair. (4) the use of a crowbar and other tools to remove the tire from the rim. Note that the action should be gentle with the tacit agreement to avoid being injured by a tire, and to protect the valve. Learn more mechanically inclined tunnel Jiangxi Xin Tong slag machine information, please visit our website: www.sitoncn.com, can call 18317993580 (Li) ,0799 -3,671,885 consultation, we will Depending on your situation the project selection slag machine models and supporting programs designed for you, but you are welcome to visit our company and guide our work. Website: http://www.sitoncn.com Tel 0799 -3671885 18317993580 (Li) Fax :0799 -3,671,128 -3,671,126 accessories sales service hotline 0799 400 -821-121 0799-3671126 Address: Jiangxi Pingxiang City, Xiangfan Hi-tech Park, North Cinder underground mining machine Crawler Cinder Cinder Cinder tunneling machine machine machine Cinder Cinder machine price quote, Shanxi, Yunnan small electric machine Cinder Cinder Cinder machine machine Compact Track Cinder machine